Trimpro | Automatik XL / Large
Let the TRIMPRO AUTOMATIK XL handle your trimming needs with its 5x higher capacity and productivity compared to its smaller counterpart, the Trimpro Automatik. The fluted grate design aids plant movement, and with a dimmable motor controlling whirlwind speed, along with a height-adjustable six-blade assembly, operators have precise control. Simply place fresh flowers in the upper container, and the Automatic XL takes care of the trimming.
For easy trimming, place fresh flowers in the upper container and let the Trimpro Automatic do the rest. Adjust the variable-speed motor for ideal trimming speed and customize trim levels with height-adjustable blades. The whirlwind effect guides flowers over the grate and blades, depositing trimmed flowers and collecting leaf trimmings in a mesh bag.
Easy to Use
Transparent plexiglass lid and adjustable processing speed ensure safe and easy use. Efficiently process flowers and buds in the staging box, watching them circulate through the grate. Open the chute to release trimmed flowers into a separate container.
Simple to Maintain
The Trimpro Automatik XL features a leaf recovery system for quick disposal, easy disassembly for transport, and removable blade assembly for sharpening. Clean the non-stick grille and blade with isopropyl alcohol between uses. Replacement parts are available for purchase. Always prioritize safety and avoid direct contact with razor or blade.
Technical Specifications of Trimpro Automatik XL
Mounted machine: 39″ x 36″ x 51″ Height
Packaging: 35″ x 35″ x 31″ Height
Machine only Approximated Weight: 162 Lbs
Machine and packaging: 195 Lbs
Trimpro Automatik XL (STD): large slots only (7/16″)
- Never place your fingers, gloves, or any other body part in contact with the grate or the blade.
- Never apply pressure on the grate.
- Do not use scissors, knives, or any instrument above the grate.
- Safety glasses and gloves are required at all times.
- The gloves have to be tight enough so they don’t get inside the grate slots. A loose glove is dangerous. BE AWARE!
The manufacturer does not accept any responsibility for damages caused to or by the trimmers resulting from an inadequate use or assembly. Use the trimmers in accordance with existing laws and regulations.
FAQs of Trimpro Automatik XL
How am I supposed to clean my Trimpro machine?
Using a plastic scraper to collect the build-up of the pollen. Do not use a metal scraper to scratch the coating on the grate and blade. Using a rubbing alcohol cloth to finish washing.
How am I supposed to clean my Trimpro Bag?
Soak the bag in warm water and rub it off. You may also soak it in rubbing alcohol for a short time, wipe the excess off, and simply move it through some running water to finish cleaning.
How am I going to change the height of my Trimpro blade?
For each computer, instructions for changing the height of the blade can be found on their respective instruction sheet.
How often do I need to Sharpen My Blade?
Trimpro blades are made of tempered steel, which makes them very durable and gives them a long life. It is essential for the quality of your manicure to keep it sharp. The manufacturer suggests that they be sharpened every 6 months to one year (highly depending on usage).
How am I going to Sharpen My Trimpro Blade?
The blade shaving on Trimpro trimmers is a simple operation. The most critical aspect of the operation is that you do not separate the blade from the hub to which it is connected! The tempered steel blades are balanced on the aluminum core, allowing the trimmers to work optimally. If the blade is removed from the hub, there is no guarantee that the assembly will be balanced when you bring it back into the system. For each unit, the Sharpening Instructions can be found on their respective instructions board.
How am I going to adjust the amount of air suction on my Trimpro machine?
You can bend the flaps upwards on each computer (except the rotor) to reduce their angle. This results in less air movement, thereby lowering the amount of suction. You can bend the flaps down to increase their angle. This results in more air displacement, thus increasing the amount of suction.
* CAUTION: When you bend the flaps down, make sure that the flaps do not touch the metal wire brake line.
Warranty of Trimpro
Trimpro products have a one year warranty on faulty parts. If you make a warranty claim, please have the serial number that’s engraved on the bottom of the machine.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.