Built from an established performer in careful and effective trimming, the TRIMPRO ROTOR MED is specifically designed to meet high regulatory requirements, with its medical equipment components compliant, simple and rapid disassembly and assembly, and special waste management and control characteristics.
Purpose-built to meet the requirements of the medical industry and certified by the CSA, the TRIMPRO ROTOR MED is designed to ensure ease of operation and performance. Each unit is easy to disassemble for sterilization and is reassembled as quickly as possible to minimize downtime.
Flexible fingers are immune to steam and alcohol. The blade is made of tempered stainless steel and all stainless steel connectors and fittings. White surfaces are finished with normal medical paint. The PlexiglasTM hood guarantees debris-free service.
Without vacuum parts, waste management and cleaning are significantly simplified, further supported by regular weight, quickly removed and sealed square trim bags.
Technical Specifications of Rotor Med
Mounted machine: 17″ diameter, 21″ tall
Packaging: 21″ x 21″ x 24″
Approximated weight: 30 lbs
Blades: Tempered Steel
Non-Stick Coated Steel Standard
Slot size 1/4″ (6 mm)
- Never place your fingers, gloves, or any other body part in contact with the grate or the blade.
- Never apply pressure on the grate.
- Do not use scissors, knives, or any instrument above the grate.
- Safety glasses and gloves are required at all times.
- The gloves have to be tight enough so they don’t get inside the grate slots. A loose glove is dangerous. BE AWARE!
The manufacturer does not accept any responsibility for damages caused to or by the trimmers resulting from an inadequate use or assembly. Use the trimmers in accordance with existing laws and regulations.
FAQs of Trimpro Rotor Med
How am I supposed to clean my Trimpro machine?
Using a plastic scraper to collect the build-up of the pollen. Do not use a metal scraper to scratch the coating on the grate and blade. Using a rubbing alcohol cloth to finish washing.
How am I supposed to clean my Trimpro Bag?
Soak the bag in warm water and rub it off. You may also soak it in rubbing alcohol for a short time, wipe the excess off, and simply move it through some running water to finish cleaning.
How am I going to change the height of my Trimpro blade?
For each computer, instructions for changing the height of the blade can be found on their respective instruction sheet.
How often do I need to Sharpen My Blade?
Trimpro blades are made of tempered steel, which makes them very durable and gives them a long life. It is essential for the quality of your manicure to keep it sharp. The manufacturer suggests that they be sharpened every 6 months to one year (highly depending on usage).
How am I going to Sharpen My Trimpro Blade?
The blade shaving on Trimpro trimmers is a simple operation. The most critical aspect of the operation is that you do not separate the blade from the hub to which it is connected! The tempered steel blades are balanced on the aluminum core, allowing the trimmers to work optimally. If the blade is removed from the hub, there is no guarantee that the assembly will be balanced when you bring it back into the system. For each unit, the Sharpening Instructions can be found on their respective instructions board.
How am I going to adjust the amount of air suction on my Trimpro machine?
You can bend the flaps upwards on each computer (except the rotor) to reduce their angle. This results in less air movement, thereby lowering the amount of suction. You can bend the flaps down to increase their angle. This results in more air displacement, thus increasing the amount of suction.
* CAUTION: When you bend the flaps down, make sure that the flaps do not touch the metal wire brake line.
Warranty of Trimpro
Trimpro products have a one year warranty on faulty parts. If you make a warranty claim, please have the serial number that’s engraved on the bottom of the machine.
Return and Refund Policy of Trimpro
You should expect a refund in the same form of payment originally used for purchase within 30 days of receipt of your returned order.
You will be refunded the shipping cost (proof of payment required) if the return is due to a manufacturing fault or a shipping error on our part.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.